Choose the help your home needs.
Swapped out the old unit for a new 90-90 furnace on a pedestal, reusing the existing thermostat and AC coil while adding a new 20×25 drop-in filter boot, 12×25 return drop, and fresh 20x25x1 filter. Went over the gas utility rebate info with the homeowner and collected the check once the new system was heating properly.
Installed a new 90-90 furnace on a new base, added the second PVC pipe to convert it to a 2-pipe sealed combustion setup, reused the existing thermostat, and put in a new condensate pump along with a 16×25 drop-in filter boot and 10×25 return air drop. Removed the old humidifier, helped with the gas rebate info, and ran the customer’s credit card once everything was firing and venting the way it should.
Installed a new 80-90 system with a 59TP7A060V17–16 furnace, 26SPA624 condenser, vertical cased coil, new Ecobee thermostat, condensate pump, and updated 16×25 filter boot and 10×25 return drop while reusing and flushing the existing lineset. Set fan speed to 1000 CFM, verified superheat and subcool to match the condenser specs, walked through the system operation with the homeowner, and collected the check once everything was running smoothly.
3 jobs
Heating and cooling in West St. Paul, MN
A heating system can serve more than one part of a home. Our West St. Paul boiler work shows why controls and valves matter along with the main equipment.
In a West St. Paul boiler project, we replaced valves for two heating zones. If one part of your home stays cold, tell us which. The whole boiler may still be working.
Ask which thermostats and zone parts will stay after a system change. Have us check their fit with the new equipment. A clear list helps you compare what each quote actually covers.
West St. Paul requires separate trade permits alongside a building permit. If the HVAC work is part of a remodel, ask how wiring and plumbing steps fit. The full plan should name those handoffs.
If you use boiler heat, tell us how the home is cooled. Mention rooms with window units or no cooling. That helps us discuss separate cooling options without assuming you have air ducts.
Book MSP with a list of heating zones and their thermostats. Tell us which rooms stay cold and whether cooling work is part of the same project.
| SERVICE AREA
Joshua of MSP did a great job with complete installation of heat pump and furnace in just 7.5 hours. He and the crew cleaned up thoroughly and guided us on the app to be able to control temperature remotely. Will gladly recommend MSP to others.
Dave did a great job of explaining everything well in regarding to switching from a gas furnace to a heat pump heating/cooling system and a heat pump hot water heater. He was patient with all of my questions. He responded quickly and gave me a reasonable bid. He was nice to work with and made me comfortable with the process.
Nick Z was awesome! He came for our annual water heater tune up and I left with some pretty great knowledge about water pressure in an old house. We will definitely have them out again soon to work on that!
We’ve delivered unmatched customer service to the Twin Cities for over 100 years. You’re in good hands with MSP!
