Choose the help your home needs.
Installed a new Carrier 2.5-ton condenser with matching indoor coil, reusing and flushing the existing lineset and reconnecting power/low-voltage with a new whip and breaker. Built a transition from coil to canvas, ran a new condensate drain, set charge, and test-ran the system with the Ecobee stat to confirm proper operation.
Installed a Carrier Performance 80% two-stage gas furnace with a new Ecobee thermostat, new boot and drop, and all-new B-venting. Built supply/return transitions, set gas pressures and CFMs for heat and cool, then test-ran the system to verify proper operation.
Installed a Carrier Infinity heat pump with a modulating gas furnace, new Infinity thermostat, and an AprilAire 600 humidifier, reusing and flushing the existing lineset. Single-piped the venting to meet code, set gas pressures, and tested both heating and cooling to confirm proper operation.
3 jobs
Heating and cooling in Inver Grove Heights, MN
A heating or cooling upgrade may also need power work in the same utility room. MSP can help make one clear plan for the parts that need to change.
MSP's Inver Grove Heights install included the outdoor unit, indoor coil, drain and power lead. Ask your quote to show the supporting work too. That makes equipment options easier to compare.
That local job kept the thermostat. We also cleaned and reused the cooling lines. Ask which old parts fit the new setup. We should check them before deciding what stays in place.
The city's property search shows permit history without an account. Past room or equipment work can help explain today's setup. Share any plans you have for a finished basement or new room.
The city handles HVAC permits. The state handles permits for wiring. Ask for a plan that joins both trades if you need them. Final tests should check both the units and their power supply.
Schedule an HVAC visit with MSP. Tell us which system you plan to keep and which needs help. Bring the full scope if another contractor is remodeling your home.
| SERVICE AREA
Dave did a great job of explaining everything well in regarding to switching from a gas furnace to a heat pump heating/cooling system and a heat pump hot water heater. He was patient with all of my questions. He responded quickly and gave me a reasonable bid. He was nice to work with and made me comfortable with the process.
MSP did such a great job in my A/C install I chose them to replace my heating boiler. Once again I got exceptional service from both Dave Johnson, the estimator and Jefferson Hanson, the installer. Jefferson was efficient, extremely knowledgeable and respectful of the workspace. I cannot recommend MSP enough.
Nick Z was awesome! He came for our annual water heater tune up and I left with some pretty great knowledge about water pressure in an old house. We will definitely have them out again soon to work on that!
We’ve delivered unmatched customer service to the Twin Cities for over 100 years. You’re in good hands with MSP!
