Choose the help your home needs.
Installed a Carrier 59TP6C furnace with a 2-ton Performance 18 heat pump and matching coil, added an Ecobee 3 stat, Aprilaire 600 humidifier, condensate pump, and new return drops with a 16×25 filter boot. Swapped the planned 40-gal short power-vent for a 40-gal tall due to damage, set gas pressures, updated venting using the existing 6″ penetration, and verified heating and cooling during the walkthrough.
Installed an 80–90 total system with a Carrier 59TP6C furnace and 2-ton 38MURAQ heat pump/coil, kept the existing lineset and chimney liner/cap, and set an Ecobee 3 (no Wi-Fi) with a new humidifier, condensate pump, and duct transitions. Brought the homeowner’s water heater up to code with 3″ B-vent and a Y-connector and updated the gas piping, then wrapped up with a walkthrough.
Installed a Burnham X203NGH 80-80 boiler with a new 40-gal Bradford White water heater, replaced three 3/4″ zone valve head motors, swapped the boiler gas shutoff, and added the hands-free kit. Reused the thermostat and chimney liner/cap, test-fired the system and left it running; final electrical was scheduled for 10/7.
3 jobs
Heating and cooling in Fridley, MN
Before buying more heating power, check where your home loses heat. Fridley's home energy resources can help you pair equipment work with the house it needs to serve.
Fridley lists Home Energy Squad visits that check air leaks and insulation. If high bills are your main concern, review those findings before a furnace quote. Ask which problem equipment can solve.
At a Hillcrest Drive home, we paired a heat pump with a furnace and indoor coil. Ask how a similar plan would switch heat sources. Use your own fuel bills for the comparison.
Our Van Buren Street project kept the chimney liner and updated the water heater vent. If your furnace and water heater share a chimney, have us review both before changing either one.
Tell us if rooms cool down fast after the heat stops. Note if wind changes the problem. These clues help us assess the home and air flow along with the heating equipment.
Bring MSP your energy assessment if you have one. Tell us whether your goal is fewer cold rooms, a lower bill or replacing a system that has failed.
| SERVICE AREA
Great service from Mike who did a boiler health check inspection. He was very friendly, knowledgeable, and professional and I appreciated his system care recommendations. He also explained some of the inner workings of the system while it was opened up which was very helpful.
Jimmy did a great job installing our whole house humidifier and cleaning our furnace of the sediment from running portable humidifiers.
Bo did a plumbing check at my home today. He was very professional, answered questions, drained water heater, and cleaned debris from the faucet aerators. Left estimates for replacing lower toilets with higher ADA approved toilets, and replacing the plastic water turnoffs with regular turn handles to shut off the water. Very helpful.
We’ve delivered unmatched customer service to the Twin Cities for over 100 years. You’re in good hands with MSP!
