Choose the help your home needs.
Installed a new Carrier furnace and 2-ton AC with matching coil, replaced the 20′ lineset, and set up an Ecobee 3 using a wire saver since running a new common wasn’t possible. Moved the furnace back for clearance, added a drop-in filter boot and new return, tested everything, and wrapped up with a homeowner walkthrough.
Installed a new 2.5-ton Carrier AC with matching coil, reused and flushed the existing lineset, and kept the current thermostat and humidifier. Built a new transition from coil to canvas, charged the system, and wrapped up with a homeowner walkthrough.
Installed a new Carrier 2.5-ton AC with a cased coil, replaced the 30′ lineset, and set up an Ecobee 3 thermostat. Removed the old humidifier to make space, adjusted charge for the short lineset, set fan speed, reused the existing drop/boot, and tested everything with the customer.
3 jobs
Heating and cooling in Chaska, MN
A good system needs room to fit and controls that work. Our Chaska project notes show why a whole-system quote should include more than model numbers.
On Woodridge Drive, we moved a furnace back to gain clearance. Show us shelves and doors around your equipment. That space can change the layout of a replacement system.
The same job used a wire saver because a new common wire could not be run. Before buying a smart thermostat, ask us to check its power and wiring needs.
If you want heat and AC replaced together, ask for one plan for the coil, fan and return air. Separate equipment choices still need to fit and work together in your home.
Chaska lists both home energy audit and HVAC rebate forms. An audit may help if comfort is the main issue. Check current program terms before counting a rebate in your budget.
When you book an HVAC quote, send MSP a wide view of the furnace room. Tell us if you want to keep your thermostat or change it.
| SERVICE AREA
We were experiencing poor air flow on the air conditioning side of our HVAC system, throughout the house. .Jimmy was able to adjust the setting on the furnace motor. The air flow improved immediately. He also recommended we set the thermostat to “fan on” vs “auto” all the time. Jimmy was very friendly, knowledgeable and fast!
Great company. Had an another company come to check my air conditioner and furnace. Was told needed to replace. Wanted another opinion and MSP said it was fine. So happy. The technician was great. Told friends about MSP.
Bo did a plumbing check at my home today. He was very professional, answered questions, drained water heater, and cleaned debris from the faucet aerators. Left estimates for replacing lower toilets with higher ADA approved toilets, and replacing the plastic water turnoffs with regular turn handles to shut off the water. Very helpful.
We’ve delivered unmatched customer service to the Twin Cities for over 100 years. You’re in good hands with MSP!
