| Process
Choose the help your home needs.
Total Comfort Club members are among the savviest homeowners in the Twin Cities area. Join over 5,000 club members who have access to two annual tune-ups, home service discounts, priority service, and much more – all for just $8.25 a month!
Here’s what you’ll enjoy:
A Minneapolis home with a 12-year-old boiler lost heat entirely. The tech diagnosed a failed autofill valve, the component responsible for maintaining proper water pressure in the system. Without it working, the boiler couldn't maintain pressure and shut down. A new autofill valve was installed, the system was brought back up to operating pressure, and heat was restored the same afternoon.
A Minneapolis homeowner's boiler kept shutting off and wouldn't stay running. The tech diagnosed a failed circulator pump, the component that moves hot water through the radiators. The correct Taco replacement pump was ordered and a return visit was scheduled to install it once the part arrived. Heat was fully restored on the second visit.
A Minneapolis homeowner's 15-year-old boiler was heating most of the house but one zone had gone completely cold. The tech found two separate issues: a failed zone valve head that was preventing hot water from reaching that zone, and a fouled pilot assembly with a worn thermocouple. Both were repaired in the same visit, zone valve head replaced, pilot assembly cleaned, thermocouple replaced, and the boiler was tuned up while the tech was there.
A Minneapolis homeowner's lower level was overheating, the boiler was running that zone constantly and they'd had to shut the whole system down. The tech diagnosed a failed expansion tank, which is responsible for absorbing pressure as hot water expands through the system. On a 10-year-old boiler, expansion tanks wear out as the internal bladder loses its ability to hold air pressure. The old tank was swapped out and the system restored to normal operation.
A Minneapolis homeowner scheduled a fall tune-up on their 17-year-old furnace before the heating season started. During the inspection, the tech found a gas line issue that needed to be addressed, not something you want heading into a Minnesota winter. The gas repair was completed same visit, and the furnace tune-up was performed to get the system ready for the season.
Replaced a 24-year-old furnace and 25-year-old AC system with a new 97% efficiency Carrier furnace, Carrier heat pump condenser, and 3-ton cased A-coil at this Northeast Minneapolis residence. The team flushed and reused the existing lineset, ran new low-voltage wiring to the condenser, and installed an Ecobee 7 smart thermostat with a new surge protector and return air setup. Job completed in a single day with four technicians on-site, including a coordinated electrical visit for permit work.
6 jobs
MSP installed a whole-home air-source heat pump, central air handler, heat pump water heater, mini-split head, and ERV in my 1940s Minneapolis home a year or so ago. They've been great about coming back to fine-tune and are always super pleasant and knowledgeable. Very accessible appointments. Highly recommend.
Ashley did an amazing job per normal. Everyone you guys send/hire truly know the art of the elevation of the client experience. All the techs that come from MSP are always amazing and very helpful. Thank you MSP for always taking care of us. I love everything about MSP Plumbing and Heating. Thank you
Tyrone ame out to to do a furnace tune up for us and he was an absolute professional. He was very customer focused and courteous. I am very pleased with the my interaction with Turone and MSP in general. Their service and expertise had been consistently above my expectations over the years.
Heating in Minneapolis, MN
A cold room does not always mean a failed boiler. Our Minneapolis repair notes show how pumps and valves can affect heat in different parts of a home.
At one Minneapolis home, a failed zone valve kept one area cold. Other rooms still had heat. Tell us that pattern when you call so we can focus the first checks.
One boiler kept shutting off when its pump failed. That pump moves hot water through the pipes to heat the rooms. Note whether yours starts, runs briefly, or never starts at all.
A no-heat call in Minneapolis led us to a failed autofill valve. It keeps water pressure in the boiler. We changed it and restored heat. Ask what caused your fault before choosing a new boiler.
The circulator-pump repair required an ordered part and a return visit. Ask which parts are available and what happens next. Keep the boiler model handy so the repair plan starts with the right unit.
Tell MSP whether all radiators are cold or just one zone. Share the boiler model and any code you can read without opening the unit.
